Fix Chipped Quartz Countertops in 5 Easy Steps

Home decor enthusiasts have been singing praises of quartz countertops for a while now and rightly so too. It is a hybrid material made of stone and resin. They are incredibly durable and just as, if not more, beautiful to look at. If you are planning a kitchen remodeling in near future, call a countertop installer to put up quartz tops. Quartz is also very versatile and can be made to fit a number of different aesthetics.

Even after being one of the most robust materials, it is not entirely implausible to find an odd chip somewhere. It is no reason to worry though. This simple step-by-step guide will teach you how to fix chipping on quartz.

How to Repair Chips on Quartz Countertops?

STEP 1: Clean The Surface

Before anything else, clean the countertop with a mild ammonia-based cleaning solution. Use a damp, microfiber washcloth to wipe the top free of grime, dirt, and dust that might have settled. The ammonia solution is specifically recommended due to being non-abrasive to quartz.

STEP 2: Mark The Area Using Masking Tape

Once the surface is dry, border the area around the chip with tape. The masking tape makes sure you don’t have to deal with stubborn caulk stains afterward. This will also keep your countertop from getting adhesive streaks. Trust us, adhesive stains are impossibly hard to get rid of.

STEP 3: Super Glue for Light Colored Quartz

If your countertop is light-colored, super glue is an ideal option. It dries clear and thus will be barely noticeable. Use a spatula or flat blush to apply layers of the superglue over the chip until it is completely sealed. Let the glue cure for 24 hours before setting anything heavy on it. Also, keep the area away from water until the glue has completely set.

NOTE- For chips on the surface of the counter, use glue of thinner consistency. Chips on the corner or edges should be fixed with thick super glue such that it maintains form while curing.

STEP 4: Pigmented Epoxy Adhesive for Dark/Textured Quartz

Find a dye closest to the shade of your countertop and mix it evenly with epoxy adhesive. On reaching the desired color, apply the glue to the chip using a spatula or flat brush. Gently slide the epoxy adhesive into place. Don’t be afraid to go over with a few extra layers since, unlike super glue, epoxy adhesive shrinks upon drying.

STEP 5: Sand The Dried Adhesive

Following 24 hours of application, use high grit sandpaper to buff the cured glue. This will make the glue look smooth and even. You can also trim off the little excess using a razor blade. Keep your movements precise and don’t cut off more than was needed.

Premium Countertops from Hōm Kitchen + Bath

We take great pride in our creative prowess. Our team has always been known to breathe your ideas into life with spectacular accuracy. Remodel your home with Oklahoma City’s most trusted countertop installers. Our showrooms have already stocked up on the latest designs, when can we expect you here?

Comments

Popular posts from this blog

Marble Countertops: 4 Reasons to Consider It for Your Kitchen

Refining the Excitement with Trendy Kitchen Countertops of 2022

Marble vs. Granite: Learn Which Countertop is Suitable for You